10.5kW Hybrid Solar Inverter

Filter

Showing all 2 results

Sort:

Show:

15%

Ziewnic Z5 PV 13000 10.5kW Hybrid Solar Inverter Price in Pakistan

Add to wishlist

Compare

Ziewnic Z5 10.5kW Hybrid Solar Inverter

Add to cart

In Stock

Ziewnic Z5 PV 13000 10.5kW Hybrid Solar Inverter Specs:

1-Phase system
13000W maximum PV input power
10500W rated output power
180A maximum solar charging current
Grid-tied operation capable
360VDC nominal DC voltage, 500VDC maximum
Two MPPT trackers, 32A max input current each
220/230/240VAC nominal output voltage
47A nominal output current
0.99 power factor
98% maximum conversion efficiency
10500W maximum main load output
3500W maximum second load output in battery mode
Pure sine wave output in battery mode
RS232/WiFi/GPRS communication interfaces

Ziewnic Diamond PV 13000 10.5kW Hybrid Solar Inverter Price in Pakistan

Add to wishlist

Compare

Ziewnic Diamond PV 13000 10.5kW Hybrid Solar Inverter

Add to cart

In Stock

Ziewnic Diamond 10.5kW Hybrid Solar Inverter Specs:

1-Phase system
Maximum PV Input Power: 13000W
Rated Output Power: 10500W
Maximum Solar Charging Current: 160A
Nominal DC Voltage/Max DC Voltage: 360VDC/500VDC
Start-up Voltage/Initial Feeding Voltage: 90VDC/120VDC
Maximum DC Voltage Range: 90450VDC
Number of MPPT Trackers/Max Input Current: 27A
Nominal Output Voltage: 220/230/240VAC
Output Voltage Range: 195.5-253VAC
Nominal Output Current: 47A
Power Factor: >0.99
Grid Frequency Range: 4951±Hz
Maximum Conversion Efficiency: 98%
Pure Sine Wave Output

SolarEdge SE50K – 50 kW Three‑Phase Synergy Commercial Solar Inverter

Add to cart

In Stock

Modular Synergy Design

Built around a Synergy Manager and multiple Synergy Units that share the load — lighter and easier to install than traditional monolithic inverters.

Independent unit operation improves uptime and serviceability.

High Efficiency & Monitoring

Up to ~98.3 % peak conversion efficiency with panel‑level performance visibility via SolarEdge optimizers.

Real‑time monitoring via Ethernet/RS485 and optional cellular/Wi‑Fi.

Advanced Safety

Arc fault protection, rapid shutdown, SafeDC™ emergency DC reduction, and built‑in surge protection support safer operation and code compliance.

Pre‑commissioning validation identifies wiring issues before grid connection.

Smart Commissioning & Monitoring

Setup via SolarEdge SetApp for quick on‑site configuration.

Remote performance data access for maintenance and diagnostics.

Commercial‑Ready Build

IP65 weatherproof rating for indoor or outdoor installation.

Ideal for commercial rooftops, factories, warehouses, carports, and industrial solar fields.

18%

Add to wishlist

Compare

Knox Zynex 15KW Hybrid Solar Inverter

Add to cart

In Stock

Rated Output: 15 kW (15,000 W) high‑capacity power

Hybrid Design: Works seamlessly with solar panels, batteries, and utility grid

Multiple MPPT Trackers: Maximizes solar harvesting even under partial shading

High PV Input Support: Handles large solar panel arrays (up to ~30,000 Wp)

Battery Compatibility: Works with lithium‑ion (LiFePO₄) & lead‑acid batteries

Fast UPS Switch: Instant transfer during power cuts for continuous backup

Smart Monitoring: Wi‑Fi/Bluetooth app monitoring & LCD display

IP66 Protection: Dustproof and waterproof for outdoor installation

Expandable: Parallel operation supported for future system growth

Built‑in Protection: Overload, short‑circuit, surge, overheating safeguards

Net‑Metering & Grid Export Support: For solar systems connected to utility grid۔

Add to wishlist

Compare

MaxPower Voltas 12kW‑H6 12 kW single‑phase hybrid solar inverter

Add to cart

In Stock

Rated Power: 12,000 W (12 kW) single phase

Hybrid Operation: Works with solar panels, battery storage, and grid for flexible energy management

4 MPPT Trackers: Four independent MPPT inputs for maximizing solar generation from multiple panel strings

Wide PV Input: Supports up to around 18,000 W PV capacity (solar panel input)

Battery Support: Compatible with both lithium‑ion and lead‑acid batteries (typical voltage range ~40–60 V)

High Efficiency: Up to around 98 % solar conversion efficiency

7″ Touchscreen LCD: Built‑in display for easy monitoring and system configuration

Monitoring: Built‑in Wi‑Fi (loads, export, battery, solar tracking), remote monitoring options

Durable Protection: IP65 rated housing — water and dust resistant for outdoor installation

Operating Modes: On‑Grid, Off‑Grid, Hybrid, and Zero Export (if required by net‑metering rules)

10%

Add to wishlist

Compare

Growzatt MID 30KTL3-X 30 kW Solar Inverter

Add to cart

In Stock

Max efficiency ~98.8% for excellent performance.
Three-phase grid-tie inverter for medium commercial systems.
3 MPPT trackers to maximize energy capture.
Wide MPPT range 200–1000 V supports flexible strings.
High recommended PV capacity (~45 kW) — more panels supported.
Type II SPD protection on both DC & AC sides.
IP66 outdoor rating (dustproof & waterproof).
Intelligent string monitoring for proactive fault detection.
Multiple communication interfaces (RS485/USB/WiFi etc.).
Smart air cooling system for temperature management.
Adjustable power factor (0.8-leading to 0.8-lagging).
Anti-islanding, short-circuit & ground fault protection.

💡 Best balanced choice for systems ~35–45 kW.

Add to wishlist

Compare

MaxPower Voltas HYD 20K‑H6 Three Phase Inverter 20 kW three‑phase hybrid solar inverter

Add to cart

In Stock

Rated Power: ~20 kW three‑phase continuous output

Hybrid Operation: Solar + Grid + Battery + Backup

Multiple MPPT Trackers: Improves energy harvesting when panels face different directions

Wide DC Input Voltage Range: Flexible for various PV array configurations

High Conversion Efficiency: ~97–98 % typical

Battery Compatibility: Works with lithium‑ion and lead‑acid batteries (HV range)

Fast Backup Switch‑Over: Ensures minimal interruption during grid failure

Smart Modes: Solar‑first, battery‑first, hybrid energy management

Robust Protections: Overload, over/under voltage, short‑circuit, anti‑islanding etc.

User Interface: LCD or touchscreen display for status and settings

Communication: RS485, optional Wi‑Fi for remote monitoring

Outdoor Rated Enclosure: IP65‑type weather protection (common for commercial models)

These are typical of three‑phase hybrid inverters in the 10–25 kW range, including HYD series units.

16%

Add to wishlist

Compare

SolarEdge SE3800H – 3.8 kW HD‑Wave Single‑Phase Solar Inverter

Add to cart

In Stock

HD‑Wave Technology – Delivers a clean sine wave and industry‑leading ~99 % efficiency for improved solar power conversion.
Optimized for Power Optimizers – Designed to work with SolarEdge DC optimizers for better energy harvest and panel‑level performance.
Integrated Safety – Rapid shutdown, arc‑fault protection (AFCI), anti‑islanding, and ground fault detection for enhanced compliance and safety.
Compact & Lightweight – Easy one‑person installation with natural convection cooling (no fan).
Smart App Commissioning – Setup and configuration via SolarEdge SetApp on your smartphone.
Indoor/Outdoor Use – NEMA 4X/IP65 weatherproof enclosure for versatile mounting.
Advanced Monitoring – Module‑level monitoring with optional communications (Wi‑Fi, Ethernet, cellular).
Optional Revenue‑Grade Metering – Available for accurate production and consumption data.

The best discounts this week

Weekend Discount

Best Quality Inverter with Best Prices

Ziewnic Z5 PV 13000 10.5kW Hybrid Solar Inverter Specs:

Ziewnic Diamond 10.5kW Hybrid Solar Inverter Specs:

Filter Products

Product Status

Product categories

Recently viewed items

Log in