2.8kW hybrid solar inverter

View cart “Knox ASW 10kW LT-G2 On-Grid Solar Inverter” has been added to your cart.

Filter

Showing all 2 results

Sort:

Show:

10%

Ziewnic Marvel 2.8kW Hybrid Solar Inverter Price in Pakistan

Add to wishlist

Compare

Ziewnic Marvel 2.8kW Hybrid Solar Inverter

Add to cart

In Stock

Ziewnic Marvel 2.8kW Hybrid Solar Inverter Specs:

Rated Power: 2800VA / 1820W
Input Voltage: 230 VAC
Selectable Voltage Range: 170-280 VAC (for Personal Computers), 90-280 VAC (for Home Appliances)
Frequency Range: 50 Hz/60 Hz (Auto Sensing)
AC Voltage Regulation (Battery Mode): 230VAC ± 5%
Overload (Line Mode): Load > 110% ± 15% Alarm 5 mins, then fault if user decreases load < 100% rating; Load > 130% ± 15% fault immediately
Efficiency (Peak): 90% ~ 93%
Transfer Time: 10 ms (for Personal Computers), 20 ms (for Home Appliances)
Wave form: Simulated Sine Wave
Battery Voltage: 24 VDC
Floating Charge Voltage: 27 VDC
Overcharge Protection: 31 VDC
Solar Charger Type: Semi MPPT
Maximum PV Array Open Circuit Voltage: 55VDC
Maximum PV Array Power: 1500W

15%

Ziewnic Z4 2.8kW Hybrid Solar Inverter Price in Pakistan

Add to wishlist

Compare

Ziewnic Z4 2.8kW Hybrid Solar Inverter

Add to cart

In Stock

Ziewnic Z4 2.8kW Hybrid Solar Inverter Specs:

Rated Power: 2800VA / 1820W
Input Voltage: 230 VAC
Selectable Voltage Range: 170-280 VAC (for Personal Computers), 90-280 VAC (for Home Appliances)
Frequency Range: 50 Hz/60 Hz (Auto Sensing)
AC Voltage Regulation (Battery Mode): 230VAC +/- 5%
Overload (Line Mode): Load > 110% +/- 15% Alarm 5 mins, then fault if user decreases load < 100% rating; Load > 130% +/- 15% fault immediately
Efficiency (Peak): 90% ~ 93%
Transfer Time: 10 ms (for Personal Computers), 20 ms (for Home Appliances)
Waveform: Simulated Sine Wave
Battery Voltage: 13.5 VDC
Floating Charge Voltage: 24 VDC
Overcharge Protection: 31 VDC
Solar Charger Type: Semi MPPT
Maximum PV Array Open Circuit Voltage: 55VDC

PRIMAX Galaxy Dual PV5000+ 4 kW Hybrid Solar Inverter

Add to cart

In Stock

Dual MPPT Solar Charge Controllers – Optimizes energy harvest from two PV panel strings.
Pure Sine Wave Output – Clean, stable AC power suitable for sensitive electronics.
Smart Load Management – Prioritizes critical loads for backup efficiency.
Built‑in WiFi Monitoring – Real‑time performance tracking on smartphone or display.
Battery‑Independent Hybrid Operation – Can run with or without a battery bank.
Parallel Expansion Support – Multiple units can operate in parallel for higher capacity.
Wide MPPT Voltage Range – Flexible panel string configurations (60–450 V).
Multiple Communication Ports – RS485, CAN, RS232, USB, and dry contacts for BMS and monitoring.
Robust Protection Suite – Safeguards connected loads and the inverter from electrical faults.
Lightweight and Compact – Easier installation and space optimization.

15%

Add to wishlist

Compare

Huawei SUN2000‑150K‑MG0 150 kW three‑phase grid‑tie string inverter

Add to cart

In Stock

Rated Power: 150 kW AC output for large commercial installations

Maximum Efficiency: Up to 98.8 % for optimal energy yield

Multi-MPPT Capability: 7 independent MPPT trackers to maximize solar harvest

High DC Input Voltage: Up to 1,100 V for long string and large array compatibility

MPPT Operating Range: 200 V – 1,000 V

Output: Three-phase grid-tie (ideal for industrial and commercial use)

Protection Rating: IP66 (dust-tight and waterproof) for harsh outdoor conditions

Smart Safety Features: Arc-fault protection (AFCI), PV ground-fault protection, PID recovery, and smart string monitoring

Cooling: Intelligent air-cooling system for reliable operation

Communication & Monitoring: Supports FusionSolar platform, RS485, USB, and optional 4G/WLAN connectivity

Add to wishlist

Compare

Solplanet ASW 25K-TH – 25kW Three-Phase Hybrid Solar Inverter

Add to cart

In Stock

Add to wishlist

Compare

MaxPower Voltas HYD 20K‑H6 Three Phase Inverter 20 kW three‑phase hybrid solar inverter

Add to cart

In Stock

Rated Power: ~20 kW three‑phase continuous output

Hybrid Operation: Solar + Grid + Battery + Backup

Multiple MPPT Trackers: Improves energy harvesting when panels face different directions

Wide DC Input Voltage Range: Flexible for various PV array configurations

High Conversion Efficiency: ~97–98 % typical

Battery Compatibility: Works with lithium‑ion and lead‑acid batteries (HV range)

Fast Backup Switch‑Over: Ensures minimal interruption during grid failure

Smart Modes: Solar‑first, battery‑first, hybrid energy management

Robust Protections: Overload, over/under voltage, short‑circuit, anti‑islanding etc.

User Interface: LCD or touchscreen display for status and settings

Communication: RS485, optional Wi‑Fi for remote monitoring

Outdoor Rated Enclosure: IP65‑type weather protection (common for commercial models)

These are typical of three‑phase hybrid inverters in the 10–25 kW range, including HYD series units.

Add to wishlist

Compare

Inverex Nitrox 12 KW – 48 V Three-Phase Hybrid Solar Inverter

Add to cart

In Stock

12 KW three-phase hybrid solar inverter

Supports solar, battery, grid, and generator operation

Maximum PV input power up to 15,600 W

Dual MPPT trackers for maximum solar performance

Maximum efficiency up to 97.6%

240 A high-capacity MPPT solar charger

Pure sine wave output for sensitive appliances

Touchscreen LCD display for easy monitoring

Smart monitoring via Wi-Fi, RS485, CAN, and mobile app

Supports lithium-ion and lead-acid batteries

Parallel operation for system scalability

Generator compatibility for backup power

Zero-export function for net metering

Built-in AC breaker and surge protection

IP65 waterproof and dustproof design

Smart cooling system with low noise (<45 dB)

14%

Add to wishlist

Compare

Huawei SUN2000‑30K‑MC0 – 30kW Commercial Solar Inverter | On-Grid PV System

Add to cart

In Stock

Rated Power: 30 kW AC (three-phase)

Maximum AC Power: 33 kVA

High Efficiency: Up to 98.7 %

European Efficiency: ~98.4 %

MPPT Trackers: 4 independent MPPTs for flexible string configuration

DC Inputs: 8 PV string connections

MPPT Voltage Range: 180 – 1000 V

Maximum DC Input Voltage: 1,100 V

Protection Rating: IP66 – Dust and waterproof

Cooling: Natural convection

Safety Features: Arc-fault protection (AFCI), anti-islanding, rapid shutdown, surge protection

Monitoring: FusionSolar app connectivity, LED indicators, RS485 communication, optional 4G/Wi-Fi dongle

The best discounts this week

Weekend Discount

Best Quality Inverter with Best Prices

Ziewnic Marvel 2.8kW Hybrid Solar Inverter Specs:

Ziewnic Z4 2.8kW Hybrid Solar Inverter Specs:

Filter Products

Product Status

Filter by price

Product categories

Recently viewed items

Log in