You can contact us 24/70331-5789990
₨ 14,645,000
Subtotal: ₨ 14,645,000
Free Shipping on All Orders Over $750
The best discounts this week
Every week you can find the best discounts here.
SunLife ULTRA PLUS 11KW On/Off-Grid Solar Inverter
SunLife ULTRA PLUS 8KW On/Off-Grid Solar Inverter
SunLife IV PLUS 6.2KW On/Off-Grid Solar Inverter
SunLife INFINI ULTRA 6KW On/Off-Grid Solar Inverter
SunLife IV PLUS 4.2KW On/Off-Grid Solar Inverter
SunLife ROYAL 4KW On/Off-Grid Solar Inverter
₨ 14,645,000
Subtotal: ₨ 14,645,000
Free Shipping on All Orders Over $750
Inverex Veyron II 3.2kW-48V Solar Inverter
Inverex Veyron II 3.2kW-48V Hybrid Solar Inverter Specs:
- Rated Active Power: 3200 watts
- Voltage: 230 VAC
- Max Efficiency: 93%
- Battery Voltage: 48VDC
- Solar Charger Type: MPPT
- Max PV Array Power: 4000 watts
- Weight: 9 kilograms
- Dimensions: 17.3 x 11.8 x 3.94 inches (440 x 300 x 100mm)
- Auto Synchronization with Inverex Lithium Battery
- Works without Battery Directly on Solar
- Communication Ports: RS485, CAN-BUS, RS232
- Built-In Anti-Dust Kit
- Conformal Coating For PCB Protection
- Grid-Tie/Net Metering Option
- Built-In MPPT Solar Charger: Up to 4000 watts (80 Amp)
- Built-In BMS & SOC based battery control (3200-48V)
- Built-in Grid Feeding
- New Attractive Design
- PV-4000WATT5 SOLAR MPPT: Supports 120-450 VDC
- MPPT Supports: 18 Amps
- 5 Years Warranty
Filter Products
Product categories
- Chint Inverters
- Fox Inverters
- Fronius Inverters
- Fronus Inverters
- GoodWe Inverters
- Growatt Inverters
- Huawei Inverters
- Hybrid Inverters
- Inverex Inverters
- Knox Inverters
- MaxPower Inverters
- Off-Grid Inverters
- On-Grid Inverters
- PriMax Inverters
- Sineng Inverters
- SolarEdge Inverters
- SolaX Inverters
- Solis Inverters
- Solplanet Inverters
- SunGrow Inverters
- Sunlife Inverters
- Uncategorized
- Ziewnic Inverters
Recently viewed items
SolarEdge SE50K – 50 kW Three‑Phase Synergy Commercial Solar Inverter
Built around a Synergy Manager and multiple Synergy Units that share the load — lighter and easier to install than traditional monolithic inverters.
Independent unit operation improves uptime and serviceability.
High Efficiency & MonitoringUp to ~98.3 % peak conversion efficiency with panel‑level performance visibility via SolarEdge optimizers.
Real‑time monitoring via Ethernet/RS485 and optional cellular/Wi‑Fi.
Advanced SafetyArc fault protection, rapid shutdown, SafeDC™ emergency DC reduction, and built‑in surge protection support safer operation and code compliance.
Pre‑commissioning validation identifies wiring issues before grid connection.
Smart Commissioning & MonitoringSetup via SolarEdge SetApp for quick on‑site configuration.
Remote performance data access for maintenance and diagnostics.
Commercial‑Ready BuildIP65 weatherproof rating for indoor or outdoor installation.
Ideal for commercial rooftops, factories, warehouses, carports, and industrial solar fields.
MaxPower Sofar 125KTLX‑G4 125KW Three Phase On‑Grid Inverter
Rated Output Power: 125 kW three‑phase on‑grid inverter.
Maximum Efficiency: Up to 98.7 % (high conversion efficiency).
MPPT Technology: 10 independent MPPT trackers for optimal energy harvesting.
DC Input Voltage: Up to 1100 V DC with wide MPPT range (180 – 1000 V).
DC Inputs: Up to 20 DC inputs (typically 2 strings per MPPT).
AC Output: Nominal 380/400 V AC, three‑phase, with grid frequency support 50/60 Hz.
Grid Voltage Range: ~310 – 480 V for flexible grid conditions.
Protection Class: IP66 outdoor‑ready design.
Communication & Monitoring: LCD display, RS485, Wi‑Fi, and (optionally) Bluetooth with mobile app support.
Advanced Protection: Anti‑islanding, DC reverse polarity, Type II SPD on DC & AC sides, AFCI, ground fault and leakage current detection.
Cooling: Forced‑air fan cooling for continuous operation in hot climates.
Operating Temp: –30 °C to +60 °C (wide working range).
MaxPower Voltas 12kW‑H6 12 kW single‑phase hybrid solar inverter
Rated Power: 12,000 W (12 kW) single phase
Hybrid Operation: Works with solar panels, battery storage, and grid for flexible energy management
4 MPPT Trackers: Four independent MPPT inputs for maximizing solar generation from multiple panel strings
Wide PV Input: Supports up to around 18,000 W PV capacity (solar panel input)
Battery Support: Compatible with both lithium‑ion and lead‑acid batteries (typical voltage range ~40–60 V)
High Efficiency: Up to around 98 % solar conversion efficiency
7″ Touchscreen LCD: Built‑in display for easy monitoring and system configuration
Monitoring: Built‑in Wi‑Fi (loads, export, battery, solar tracking), remote monitoring options
Durable Protection: IP65 rated housing — water and dust resistant for outdoor installation
Operating Modes: On‑Grid, Off‑Grid, Hybrid, and Zero Export (if required by net‑metering rules)
Solis 10kW On-Grid Solar Inverter
- High efficiency: Up to 98.7% for maximum power use.
- Smart energy optimization: Wide MPPT voltage range.
- Safety first: Built-in protection against reverse-polarity and short circuits.
- Grid-friendly: Compliant with international standards for seamless integration.
- User-friendly: Easy installation and monitoring with LCD display.
- Durable design: IP65 protection and natural cooling for longevity.
- Whisper-quiet: Noise emission below 30dBA.
- Long-lasting: Designed for over 20 years of service.
- Warranty flexibility: Extendable up to 20 years.
- Compact and light: Easy to handle and install.
- Easy connections: MC4 connectors for DC, terminal connectors for AC.
Huawei SUN2000‑4KTL‑L1 4 kW single-phase hybrid solar inverter
Hybrid inverter (solar + battery + grid support)
Rated AC output power: 4,000 W
Maximum efficiency up to 98.4 %
Maximum PV input power: 6,000 W
Dual MPPT trackers for maximum solar optimization
Compatible with Huawei LUNA2000 lithium battery
IP65 protection for outdoor installation
Built-in WiFi monitoring and FusionSolar app support
Natural cooling, silent operation
10-year manufacturer warranty
SolarEdge SE3800H – 3.8 kW HD‑Wave Single‑Phase Solar Inverter
Optimized for Power Optimizers – Designed to work with SolarEdge DC optimizers for better energy harvest and panel‑level performance.
Integrated Safety – Rapid shutdown, arc‑fault protection (AFCI), anti‑islanding, and ground fault detection for enhanced compliance and safety.
Compact & Lightweight – Easy one‑person installation with natural convection cooling (no fan).
Smart App Commissioning – Setup and configuration via SolarEdge SetApp on your smartphone.
Indoor/Outdoor Use – NEMA 4X/IP65 weatherproof enclosure for versatile mounting.
Advanced Monitoring – Module‑level monitoring with optional communications (Wi‑Fi, Ethernet, cellular).
Optional Revenue‑Grade Metering – Available for accurate production and consumption data.










