You can contact us 24/70331-5789990
₨ 7,794,000
Subtotal: ₨ 7,794,000
Free Shipping on All Orders Over $750
The best discounts this week
Every week you can find the best discounts here.
SunLife ULTRA PLUS 11KW On/Off-Grid Solar Inverter
SunLife ULTRA PLUS 8KW On/Off-Grid Solar Inverter
SunLife IV PLUS 6.2KW On/Off-Grid Solar Inverter
SunLife INFINI ULTRA 6KW On/Off-Grid Solar Inverter
SunLife IV PLUS 4.2KW On/Off-Grid Solar Inverter
SunLife ROYAL 4KW On/Off-Grid Solar Inverter
₨ 7,794,000
Subtotal: ₨ 7,794,000
Free Shipping on All Orders Over $750
Ziewnic Z6 PV 12000 9kW Hybrid Solar Inverter
Ziewnic Z6 9kW Hybrid Solar Inverter Specs:
- Max. PV Input Power: 12000W
- Rated AC Output Power: 9000VA
- Nominal DC Volt/Max DC Voltage: 360VDC/450VDC
- Start-up Voltage/initial Feeding Voltage: 120VDC
- MPPT Voltage Range: 90-450VDC
- No. of MPPT Tracker/Max Input Current: 2/27A (6000W * 2)
- Nominal Output Volt: 220 Vac / 230Vac / 240Vac, Single Phase
- Output Voltage Range: 184V - 256Vac or 195 - 253V (Selectable)
- Nominal Output Current: 40.9A
- Power Factor: >0.9
- Max. Conversion Efficiency (DC/AC): 98%
- AC Start-up Voltage/Auto Restart Volt.: 120Vac - 140Vac / 180Vac
- Acceptable Input Voltage Range: 90 - 280Vac or 170 - 280Vac
- Max. AC Input Current: 63A
- Max DC Voltage: 450VA DC
Ziewnic Z6 12kW Hybrid Solar Inverter
- Max. PV Input Power: 15000W
- Rated AC Output Power: 12000W
- Grid Tie Operation
- Input Voltage: 230VAC
- Output AC Voltage Regulation: 230VAC±5%
- Surge Power: 22000VA
- Efficiency (Peak): 93%
- Transfer Time: 10ms (PCs), 20ms (Home Appliances)
- Output Waveform: Pure Sine Wave
- Battery Voltage: 48VDC
- Max. PV Array Power: 15000W (7500W x 2)
- Max. PV Array Open Circuit Voltage: 500VDC
- Max. Solar Charge Current: 150A
- Max. AC Charge Current: 150A
Ziewnic Z6 PV 11000 8.5kW Hybrid Solar Inverter
Ziewnic Z6 PV 11000 8.5kW Hybrid Solar Inverter Specs:
- Max. PV Input Power: 11000W
- Rated AC Output Power: 8500W
- Nominal DC Voltage/Max DC Voltage: 360VDC/450VDC
- MPPT Voltage Range: 90-450VDC
- Nominal Output Voltage: 220V/230V/240V (Single Phase)
- Output Voltage Range: 184V-256V (Selectable)
- Nominal Output Current: 38A
- Power Factor: >0.9
- Max. Conversion Efficiency: 98%
- AC Input Voltage Range: 90-280VAC or 170-280VAC
- Battery Type Supported: 48VDC
- Max. Solar Charge Current: 120A
- Max. AC Charge Current: 120A
- Max. Total Charge Current: 120A
Ziewnic Z6 7kW Hybrid Solar Inverter
Ziewnic Z6 PV 8500 7kW Hybrid Solar Inverter Specs:
- Rated Power: 7000VA/6500W
- Input Voltage: 230VAC
- Selectable Input Voltage Range: 90-280VAC (Home), 170-280VAC (PC)
- Output Voltage Regulation (Battery Mode): 230VAC ±10%
- Overload Capacity: 5A >150%, 10s 110%-150%, 100ms >200%
- Peak Efficiency: 98%
- Transfer Time: 10ms (PC), 20ms (Home)
- Output Waveform: Pure Sine Wave
- Nominal Output Voltage (Grid-Tie): 220/230/240VAC
- Output Voltage Range (Grid-Tie): 184-264.5VAC or 195.5-253VAC
- Battery Voltage: 48VDC
- Maximum PV Open Circuit Voltage: 500VDC
- MPPT Voltage Range: 120-450VDC
- Maximum Solar Charge Current: 160A
- Maximum PV Array Power: 8500W
Filter Products
Filter by price
Product categories
- Chint Inverters
- Fox Inverters
- Fronius Inverters
- Fronus Inverters
- GoodWe Inverters
- Growatt Inverters
- Huawei Inverters
- Hybrid Inverters
- Inverex Inverters
- Knox Inverters
- MaxPower Inverters
- Off-Grid Inverters
- On-Grid Inverters
- PriMax Inverters
- Sineng Inverters
- SolarEdge Inverters
- SolaX Inverters
- Solis Inverters
- Solplanet Inverters
- SunGrow Inverters
- Sunlife Inverters
- Uncategorized
- Ziewnic Inverters
Recently viewed items
Foxess R125 Solar Inverter 125 kW Three Phase, Dual MPPT
MaxPower Voltas HYD 6K‑H6 6 kW single‑phase hybrid solar inverter
Rated output power: 6 kW (single phase)
Hybrid operation: Solar + battery + grid support for backup and smart energy use
Dual MPPT trackers: Better energy harvesting from solar arrays
Wide MPPT voltage range: 90 V – 500 V DC
Max DC input power: ~9 kW
Battery compatibility: Lead‑acid & lithium‑ion batteries
Pure sine wave output (safe for sensitive devices)
Smart monitoring options: RS485 / USB / CAN; optional Wi‑Fi/GPRS
Backup support: Keeps loads running during grid outages
SolaX OG Series Off‑Grid Inverter – 5 kW (OG548)
Ultra‑fast switchover (< 4 ms) ensures minimal interruption during grid loss.
Supports backup power even without a battery in some configurations.
High PV & Battery Current SupportCompatible with high‑power solar arrays (up to 6 kWp).
Higher‑than‑average charge (100 A) and discharge (120 A) currents improve battery performance.
Up to 200 % AC OverloadTemporary overload capability helps start high‑inrush loads like motors and pumps.
Smart & Remote MonitoringBuilt‑in Wi‑Fi allows real‑time monitoring of solar generation, battery status, and system health.
Flexible InstallationSupports parallel operation of up to three units to expand capacity for larger systems.
Multi‑Battery SupportWorks with Lithium and Lead‑acid batteries to suit various budgets and battery technologies.
Huawei SUN2000-25K-MB0 25 kW three-phase hybrid solar inverter
Hybrid inverter with battery storage support (Huawei LUNA2000 compatible)
Rated AC output power: 25 kW
Maximum efficiency up to 98.4 %
Maximum PV input power: 37,500 W
Dual MPPT with 4 DC inputs for flexible system design
Three-phase output for commercial and industrial use
Built-in AFCI arc fault protection for safety
Compatible with Huawei LUNA2000 battery storage
IP66 protection for outdoor installation
Smart monitoring via WLAN, Ethernet, RS485, optional 4G
Smart air cooling for reliable operation
GoodWe 12KW Hybrid Solar Inverter
-
High Efficiency: High maximum efficiency of up to 98.2%–98.4% ensures optimal energy conversion and maximum solar utilization.
-
Advanced MPPT Technology: Dual or multiple MPPT trackers optimize solar power generation under varying sunlight and shading conditions.
-
Hybrid Solar & Battery Integration: Supports solar panels, battery storage, and grid operation for reliable energy management and backup power.
-
Sleek Design & Easy Installation: Compact and wall-mounted design allows flexible installation in indoor and outdoor environments.
-
IP65 Weatherproof Protection: IP65 protection rating ensures durability and reliable performance in harsh outdoor conditions.
-
Seamless Communication: Communication options include RS485, CAN, WiFi, USB, and LAN for remote monitoring and system control.
-
Real-Time Monitoring: Provides real-time performance insights through GoodWe SEMS monitoring platform for maintenance and optimization.
-
Cost-Efficient Solution: Maximizes solar energy usage and reduces electricity bills through efficient hybrid energy management.
-
Reliable Performance: Advanced safety features and durable design minimize downtime and ensure stable long-term operation.
-
User-Friendly Operation: LCD display and smart monitoring interface make system operation simple and convenient.
-
Environmental Sustainability: Supports clean renewable energy usage and reduces carbon footprint.
-
Versatile Applications: Ideal for residential, commercial, and hybrid solar systems with backup support.
-
Long-Term Durability: Built with high-quality components and weather-resistant housing for extended lifespan.
-
Monitoring System Integration: Seamlessly integrates with GoodWe SEMS monitoring and energy management systems.
-
Flexible Installation: Compatible with various solar panel configurations and battery types.
-
Standards Compliance: Meets international safety and performance standards with built-in protection features.
SolarEdge SE3800H – 3.8 kW HD‑Wave Single‑Phase Solar Inverter
Optimized for Power Optimizers – Designed to work with SolarEdge DC optimizers for better energy harvest and panel‑level performance.
Integrated Safety – Rapid shutdown, arc‑fault protection (AFCI), anti‑islanding, and ground fault detection for enhanced compliance and safety.
Compact & Lightweight – Easy one‑person installation with natural convection cooling (no fan).
Smart App Commissioning – Setup and configuration via SolarEdge SetApp on your smartphone.
Indoor/Outdoor Use – NEMA 4X/IP65 weatherproof enclosure for versatile mounting.
Advanced Monitoring – Module‑level monitoring with optional communications (Wi‑Fi, Ethernet, cellular).
Optional Revenue‑Grade Metering – Available for accurate production and consumption data.













